0.6w tail light for dynamo set, where to buy? - Page 2

03-05-2005, 01:21 PM

In article <pan.2005.03.06.20.32.42.966438@nospamhome.se>,
maxo <maxo@NOSPAMhome.se> writes:
> On Sat, 05 Mar 2005 11:42:08 -0800, Tom Keats wrote:
>
>> The community-oriented bike shop down the street from me
>> has a box full of old used ones; customers can root through
>> the box, pick the one or two they like, and would probably
>> pay around $2 for each.
>
> Yeah, if I was in Chicago, I'd head up to Urban Bikes on North Sheridan
> and grab an old bullet light.
>
> I've found the standard Union tail light online for a tenner, that might
> be the ticket--though I was hoping for something pointier.

The cheap sets I've seen come with those pointy things.

Heh. I was just remembering when some cars had blue taillights.

Anyhow, I think I saw that LED thing Guy was talking about, in
the Peter White site.

In my previous post when I said 'chainstay' I meant 'seatstay'.

I rather like having the taillight on the fender.

cheers,
Tom

--
-- Nothing is safe from me.
Above address is just a spam midden.
I'm really at: tkeats [curlicue] vcn [point] bc [point] ca

03-06-2005, 07:38 AM

maxo wrote:
> I have a LED light on the bike and a dynamo set up front, but I
wanted to
> add a little generator driven light to the left seat stay. You can
get one
> easily enough in Europe, but I'm in the states. Any ideas?

If it were me, I'd go into the oldest bike shops in the area and ask.

03-06-2005, 07:38 AM

maxo wrote:
> I have a LED light on the bike and a dynamo set up front, but I
wanted to
> add a little generator driven light to the left seat stay. You can
get one
> easily enough in Europe, but I'm in the states. Any ideas?

If it were me, I'd go into the oldest bike shops in the area and ask.

03-06-2005, 08:50 AM

<[Only registered and activated users can see links. ]> wrote in message
news:1110127093.868467.51840@g14g2000cwa.googlegro ups.com...
>
> maxo wrote:
> > I have a LED light on the bike and a dynamo set up front,
but I
> wanted to
> > add a little generator driven light to the left seat stay.
You can
> get one
> > easily enough in Europe, but I'm in the states. Any ideas?
>
> If it were me, I'd go into the oldest bike shops in the area
and ask.
>
I have one of these in my heap of possibly useful bike parts.
It's off an old Schwinn-approved set and works. No generator,
just the light. I took it off because instead of 2.4 front and
0.6 rear, I preferred 3.0 front and a standard blinkie in the
rear.

If the O.P. emails me at mikekr at aol dot com and agrees to
pay postage, it's his/hers.

--
Mike Kruger
In a survey taken several years ago, all incoming freshman at
MIT were asked if
they expected to graduate in the top half of their class.
Ninety-seven percent
responded that they did.

03-06-2005, 08:50 AM

<[Only registered and activated users can see links. ]> wrote in message
news:1110127093.868467.51840@g14g2000cwa.googlegro ups.com...
>
> maxo wrote:
> > I have a LED light on the bike and a dynamo set up front,
but I
> wanted to
> > add a little generator driven light to the left seat stay.
You can
> get one
> > easily enough in Europe, but I'm in the states. Any ideas?
>
> If it were me, I'd go into the oldest bike shops in the area
and ask.
>
I have one of these in my heap of possibly useful bike parts.
It's off an old Schwinn-approved set and works. No generator,
just the light. I took it off because instead of 2.4 front and
0.6 rear, I preferred 3.0 front and a standard blinkie in the
rear.

If the O.P. emails me at mikekr at aol dot com and agrees to
pay postage, it's his/hers.

--
Mike Kruger
In a survey taken several years ago, all incoming freshman at
MIT were asked if
they expected to graduate in the top half of their class.
Ninety-seven percent
responded that they did.